27
CCa
allll FFu
un
nccttiio
on
nss
26
CCa
allll FFu
un
nccttiio
on
nss
Voice Dialing
Before using the Voice dialing feature, you must record
the name and number in your phone using the
Voice
Dial
menu. For further details, see page 81.
Note
: The voice dialing feature does not work when
your phone is in analog mode.
1. To place a call, press and hold , or open the
phone, depending on the
Set Active
menu option
(
6-1-4
). See page 77.
2. At the voice prompt, say the name into the
microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name after
two attempts, the message
Cannot Recognize
Name. Please check name
is displayed. Try the
call again later, or check the recorded name.
3. The phone dials the corresponding number.
Pause Dialing from a Stored Phone Book Entry
1. Dial the number from the Phone Book.
2. If you stored the number using “T” pause, simplay call
the number form the Phone Book.
If you stored the number using “P” pause, wait for
the
appropriate prompt for the number (credit card
number,
bank account number, etc.).
When prompted, press
to send the DTMF
number that follows your pause.
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
connect to (such as a bank’s tele-service phone
number).
2. Press
. The pause menu options display.
3. Use the navigation key to highlight one of the three
pause menu options offered.
4. Press to select an option. Continue entering the
number and using to enter pauses.
3. When the number completed, press
to call the
nubmer.