17
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
16
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
Switching the Phone On/Off
Hold down
for more than one second to switch
the phone on.
The service light on the phone flashes, and an alert
sounds. When the system locates services, the greeting
message displays along with the date and time.You can
now place and receive calls.
If the phone is out of service, the
icon appears in
the display. In this case, you cannot make and receive
calls. You can try again later when service is available.
Note
: You can change the LCD display language. To
change the language, use the
Language
menu option
(
0-4
); for further details, refer to page 91.
When you wish to switch the phone off, hold down
for more than two seconds.
WARNING!
Do not switch on the phone when the mobile phone
use is prohibited or when it may cause interference or
danger.
Note:
Your phone has a built-in antenna. As with any
other radio-transmitting device, do not touch the
antenna unnecessarily when the phone is switched
on. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power
level than otherwise needed.
Low Battery Indicator
You can easily tell if your battery needs to be recharged
by checking the battery strength indicator in the
upper-right corner of your phone’s display. The presence
of all three bars indicates a full charge, two bars
indicates a smaller charge, and one bar indicates an
even smaller charge. No bars (the battery icon is empty)
means your battery must be charged.
When the battery charge level gets low, the battery
sensor blinks an empty battery icon ( ), sounds a
tone. If the battery level gets too low, the phone will
turn off automatically. Unfortunately, if this happens
you’ll lose whatever you are doing, including dropping
your call. Watch the battery strength icon and make sure
your battery is adequately charged.