Samsung SCD-6080, Руководство пользователя

Страница: 16 / 40

installation & connection
16_ installation & connection
External Day/Night Switching Input
Day/Night mode of the camera can be switched by signal from an external device.
M

To use this function, < DAY/NIGHT > setting of the camera should be set to the < EXTERN >.
(Page 27)
Motion Detection Signal Out
Upon a motion detection, the port outputs signal for an external device for display or operation.
When a motion is detected, the port outputs 3.3V signal.
M

To use this function, < ALARM OUT > setting of the camera should be set to < ON >. (Page 30)
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
J

Be careful not to reverse the polarity when you connect the power cable.

Be sure to turn the power off the device to be connected.
For AC/DC Power Supply
You can use either one of AC 24V/1A~2A and DC 12V/2A~4A adaptor.
RS232C RS485, 422
CONVERTER
T+ T - R- R+
or
DVR
System Controller
PC
POWER
RS-485
Converter