Samsung SCD-6080, Руководство пользователя

Страница: 35 / 40

English _35
●
APPENDIX
TROUBLESHOOTING
PROBLEM SOLUTION
Nothing appears on the screen.

Check that the power cord and line connection between the camera and
monitor are properly connected.

When the camera’s HD-SDI BNC output is directly connected to the
monitor’s BNC terminal:
Make sure the monitor supports HD-SDI signal input.

When the camera’s HD-SDI BNC output is connected to the DVR: Make
sure the DVR supports HD-SDI signal input.

HD-SDI output is converted into other format such as DVI and VGA by
using video converter: Make sure the converter’s HD-SDI input format
supports the product’s output video format.
The image on the screen is dim.

Is lens stained with dirt? Clean your lens with soft, clean cloth.

Set the monitor to the proper condition.

If the camera is exposed to very strong light, change the camera position.
The image on the screen is dark.

Adjust the contrast feature of the monitor.
The camera is not working
properly, and the surface of the
camera is hot.

Check that you have properly connected the camera to an appropriate
power source.
The SENS-UP function does not
work.

Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
The Motion Detection function
does not work.

Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
Color is not correct.

Check the setting of WHITE BAL SETUP menu .
The screen flickers continually.

Ensure the camera is not pointing towards the sun.

Is the camera framing the sun or other bright light source?

HD-SDI video may not appear to be normal if distance exceeds the
maximum transferrable distance.

When a BNC cable adaptor is used to combine two or more BNC cables
for distributed HD-SDI video transfer, make sure the impedance of the
adaptor is 75Ω. Otherwise, it may cause shorter transfer distance or
broken video transfer.
RS-485 communication is not
available.

Check RS-485 communication settings.