English_23
●
se
TU
p
White Balance may not work properly under the following conditions. In this case select the AWC
mode.
1
When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
2
When the ambient illumination of the subject is dim.
➌
If the camera is directed towards a fluorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary SV-V DSP chip.
When the SETUP menu screen is displayed,
select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
Select a desired mode using the Function Setup
switch depending on the camera purpose.
UseR blC
: Enables a user to directly
select a desired area from a
picture, and to view the area
more clearly.
LEVEL : Adjust level of the BLC function.
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HlC (High light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
LEVEL : Adjusts the brightness level of a
monitoring area.
LIMIT : Enable to change the operating
condition.
1.
2.
-
-
-
-
M
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL
ATW
▶
4.BACKLIGHT
OFF
5.SSNR3
ON
BLC SETUP
▶
1.LEVEL
MIDDLE
2.TOP
IIIII
IIIIIIIIIIIIIIII
25
3.BOTTOM
IIIIIIIIIIIIIIIIII
III
90
4.LEFT
IIIIII
IIIIIIIIIIIIIII
70
5. RIGHT
IIIIIIIIIIIIIIII
IIIII
150
6. RETURN
Press SET to Return
HLC SETUP
▶
1. LEVEL
MIDDLE
2. LIMIT
NIGHT ONLY
3. MASK COLOR
BLACK
4. MASK TONE
III
IIIIIIIIIIIIIIIIII
5
5.TOP
IIIIIIIIIIIIIIIIIIIII
10
6.BOTTOM
IIIIIIIIIIIIIIIIIIIII
105
7.LEFT
IIIIIIIIIIIIIIIIIIIII
10
8.RIGHT
IIIIIIIIIIIIIIIIIIIII
210
9. RETURN
Press SET to Return
SCD-3081-ENG-new.indd 23
2011-2-16 12:13:34
