8
ENG
. Switch (LSS)
: This sens-up mode accumulates the image fields in memory to reduce
noise but increase the brightness and contrast rate. When this switch is set to
ON
, the
camera automatically switches to a maximum of 128 times of image acquisition speed to
implement a clear picture for darker image.
. Switch (H-REV)
: When this switch is set to
ON
, the camera image is reversed horizontally.
If you want to monitor your site using a mirror, you can use this feature to see the right
image.
. Switch (V-REV)
: When this switch is set to
ON
, the camera image is reversed vertically.
If your camera reluctantly displays the vertically reversed image, you can use this feature to
see the right image.
. Switch (BLC)
: When this switch is set to
ON
, you can view a clear image even though the
camera faces any excessive light such as sunlight and fluorescent light. When it is set to
OFF
, the subject with excessive light is not clearly shown.
6. Switch 6 (FL)
: When this switch is set to
ON
, the shutter speed is fixed to 1/100 sec (for
NTSC) or 1/120 sec (for PAL) to prevent screen from flickering by the disaccordance
between vertical synchronous frequency (50Hz for NTSC, 60Hz for PAL) and on-and-off
frequency of a light.
. Switch (D/N)
: When this switch is set to
ON
, the camera automatically switches between
color and B&W according to the brightness of the vicinity.
8. Switch 8 (AWB)
: This switch adjusts white balancing. When this switch is set to
ON
, this
camera operates in ATW mode, and in case of
OFF
, this camera operates in AWC mode.
ATW (Auto Tracking White Balance): The color temperature is automatically adjusted according to the
environmental change. (Approx. 2000°K to 11,000°K)
AWC (Auto White Balance Control): It stores the color temperature just when the switch is changed to
OFF
. Accordingly color temperatures are adjusted by the stored value.
Caution
-. The IRIS setting range for the camera is approximately 80 to 120 IRE. It means the camera does not
provide the IRIS full open/close feature but the restricted variation range.
-. Use the camera after setting to the proper level (80 IRE or above) because the IRIS hunting may
occur when the level is 75 IRE or below.
01-B5342_B5343-00648C(03)Eng.ind9 9
2008-08-22 오후 4:47:18
