22
– DIGITAL COLOR CAMERA
How to use OSD Menu
V-SYNC
[INT,
LINE]
Select the vertical sync mode for
INT
or
LINE
.
If you select
INT
, the camera will use the internal
synchronization.
If selecting
LINE
, the camera will use the external
power source frequency for the synchronization.
You can adjust the
LL-PHASE
.
Note
:
Use of DC 12V will fi x
V-SYNC
to
INT
, which can not be
changed.
AGC COLOR SUP
[LOW , MID, HIGH]
Adjust the color scheme according to the
AGC
value.
REVERSE
[OFF, H, V, H/V]
Mirrors video signals horizontally, vertically, or
both.
POSI/NEGA
[+,
-]
Output as it is or mirror the video brightness
signal.
PIP
[OFF,
ON]
Displays a sub image together with the main
image on the same screen using the Picture In
Picture function.
Note
:
If more than one privacy zone is set and the
PRIVACY
SET
is set to
ON
, the
PIP
function will be deactivated.
If the
INTELLIGENCE
function is set to
FENCE
mode, the
PIP menu will be deactivated.
DIS
[OFF,
ON]
Digital Image Stabilization will set the anti-shake
compensation.
Note
:
If you set
DIS
to
ON
, the compensation area will be
enlarged as set in the digital zoom factor.
If you set the digital zoom factor to greater than the
enlarged zoom factor for the compensation, the
DIS
function will be deactivated.
❖
–
❖
❖
❖
❖
–
–
❖
–
INTELLIGENCE
e
INTELLIGENCE
f
MOTION OFF
ADVANCED OFF
MASK AREA
1 2 3 4
DISPLAY ON
SENSITIVITY [4]
RESOLUTION [5]
ALARM OUT
You can set the motion detection and tracking in the
INTELLIGENCE
menu.
MOTION
[OFF,TRACKING,DETECTION]
TRACKING
Detects and tracks a moving object.
DETECTION
Detects a moving object.
Note
:
If it is set to
DETECTION
, you can not set such functions as
FIXED/MOVED
and
FENCE
in the
ADVANCED
menu.
ADVANCED
[OFF, FIXED/MOVED, FENCE]
Detects a motion of an object and displays an
image of any moving object before tracking the
moving route.
FENCE
This is to detect if a moving object passes
through the specifi ed
LINE
or
AREA
.
In a condition where a moving object is detected
in an analysis of the previous and current frames
whose movement overlaps a certain area, the
system displays “PASS” if the object’s center line
passes through the line while it displays “ENTER”
or “EXIT” if the center point passes through the
area.
❖
•
•
–
❖
•
Yo
LI
- H
①
②
③
④
