background image

7

  

SAFETY INFORMATION

two 

use 

 

alth 

aste 

es 

able 

ent 

Important safety instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s 
instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus 
(including amplifi ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 
has two blades with one wider than the other. A grounding type plug has two blades and 
a third grounding prong. The wide blade or the third prong is provided for your safety. If 
the provided plug does not fi t into your outlet, consult an electrician for replacement of the 
obsolete outlet.

  Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus.

  Only use attachments/accessories specifi ed by the manufacturer.

  Use only with cart, stand, tripod, bracket, or table specifi ed by the 

manufacturer, or sold with the apparatus.

  Unplug this apparatus when a card is used. Use caution when moving 

the cart/ apparatus combination to avoid injury from tip-over.

  Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus 

has been damaged in any way, such as powersupply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects 
fi lled with liquids, such as vases, shall be placed on the apparatus

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

Samsung Techwin cares for the environment at all product manufacturing 
stages to preserve the environment, and is taking a number of steps to provide 
customers with more environment-friendly products.The Eco mark represents 
Samsung Techwin’s will to create environment-friendly products, and indicates 
that the product satisfies the EU RoHS Directive.

Содержание SCB-9060 Series

































Отзывы: