Thermal Night Vision Camera
User Guide
22
Thermal Night Vision Camera
User Guide
23
NUC(Non-uniformity Correction) is a menu calibrating all pixel's characteristics to get better image.
Select an NUC operation mode. If you choose “MANUAL”, the user is to perform NUC manually,
instead of having the device conduct calibration automatically.
Operating the Camera
NUC MODE (Calibration Mode)
MAIN SETUP
1. BRIGHTNESS
AUTO
2. CONTRAST
MANUAL
3. RANGE
AUTO
4. NUC
5. NUC MOOE
INTERVAL
6. IMAGE ADJ
Use this option to switch between an L Range and H Range settings. Select “AUTO” to allow the
settings to automatically change between L Range and H Range based on the surrounding
temperature. Choose “L” to keep the temperature range at L Range regardless of the surrounding
temperature. In the same way, select “H” to always have the temperature range set at H Range.
3. Press the LEFT button or RIGHT button while the cursor is aligned with “3. RANGE” to switch the
RANGE setting from : AUTO
⇒
L
⇒
H
⇒
AUTO. (Default value: AUTO)
4. Press the SET button while the cursor is aligned with “4. NUC” to calibrate. Screen operations will
then be temporarily suspended.
MAIN SETUP
1. BRIGHTNESS
AUTO
2. CONTRAST
MANUAL
3. RANGE
AUTO
4. NUC
MAIN SETUP
1. BRIGHTNESS
AUTO
2. CONTRAST
MANUAL
3. RANGE
AUTO
4. NUC
5. NUC MOOE
INTERVAL
RANGE
NUC (Calibration)
Press the LEFT button or RIGHT button while the cursor is aligned with “MANUAL” to adjust the
CONTRAST over ten different levels: 1
⇒
2
⇒
3
⇒
4
⇒
5
⇒
6
⇒
7
⇒
8
⇒
9
⇒
10
⇒
1. Select
“2. RETURN” to confirm the current setting and go back to the MAIN SETUP menu screen. (Default
value: 6)
* In order for the CONTRAST AUTO setting to be enabled, the BRIGHTNESS AUTO setting must already be
turned on.
Accordingly, if AUTO cannot be set to “ON”, enable the BRIGHTNESS AUTO setting and then turn on the
CONTRAST AUTO setting.
Use this menu to adjust images. After you select this option, the following sub menu will appear.
IMAGE ADJ
5. Press the SET button while the cursor is aligned with “5. NUC MODE” to display the following
NUC MODE sub menu. Press the LEFT button or RIGHT button while the cursor is aligned with
“5.NUC MODE” to switch from: INTERVAL
⇒
AMB
⇒
MANUAL
⇒
INTERVAL. Press the SET button
again to adjust the sub menu. Select “2. RETURN” to confirm the current setting and go back to
the MAIN SETUP menu screen. (Default value: INTERVAL)
· INTERVAL : An NUC will be performed at the specified INTERVAL.
· AMB
: An NUC will only be performed when a temperature change meeting the set
temperature (0.1°C-10.0°C) is detected by the internal temperature sensor.
· MANUAL : An NUC will not be performed.
MAIN SETUP
1. BRIGHTNESS
AUTO
2. CONTRAST
MANUAL
3. RANGE
AUTO
4. NUC
5. NUC MOOE
INTERVAL
6. IMAGE ADJ
7. SPECIAL
