Samsung SCB-5000PH, Руководство пользователя

Страница: 25 / 43

English_25
●
Camera Opera
ti
O
n
y
hlC (high light Compensation) :
This function masks the strong light
to minimize white out due to over
exposure and preserve much of the
on-screen details when the camera
aims a strong light source.
- LEVEL : Adjusts the brightness
level of a monitoring area.
- LIMIT : Enable to change the
operating condition.
- MASK COLOR /TONE :
Change the color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
-
RETURN : Return to the MAIN SETUP menu.
M `
If the white balance menu is set to manual, then HLC performance can be limited.
`
If you use the defog and HLC functions at the same time, saturation can occur in a bright environment.
`
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
`
When dark, the HLC is only activated when a bright light exceeding a specifi c size. (In NIGHT ONLY mode).
`
The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode).
y
WDr : When there are both bright and
dark areas at the same time,
this mode makes both areas
distinctive.
- LEVEL : Select one from low,
med, high to adjust the brightness of the WDR setup.
<WDR ON> <WDR OFF>
-
RETURN : Return to the MAIN SETUP menu.
M
`
SCB-5000PH does not support VIDEO.
`
In WDR mode, the max/min shutter value is set to 1/2 to 1/480.
`
In WDR mode, there can be noise between a bright and dark area.
HLC SETUP
▶
1.
LEVEL MIDDLE
2.
LIMIT NIGHT ONLY
3. MASK COLOR BLACK
4.
MASK TONE
-

------- 5
5.
TOP
--

------ 30
6. BOTTOM ------

-- 75
7.
LEFT
--

------ 30
8.
RIGHT
------

-- 75
9. RETURN
WDR SETUP
▶
1.
LEVEL MIDDLE
2.
RETURN