manualshive.com logo in svg

Samsung SC-D99, Инструкция для владельца

Поделиться
Скачать
Samsung SC-D99 Скачать руководство пользователя страница 57

ENGLISH

Advanced Recording

52

52

✤

You can take natural looking flash pictures with appropriate illumination using the built-in flash or attaching the VL-S1FL video Light/
Flash (optional) to the camcorder's Smart shoe (see page 103), whether they are night scenes, in doors or in other dark places.

■

OFF : The flash does not fire.

■

(Auto) : The flash comes on depending on the brightness of the subject.

■

(Flash on) : The flash comes on regardless of the brightness of the subject.

■

(Red-eye reduction auto: built-in flash only) : The flash pre-fires automatically before the main firing to reduce the red-eye

phenomenon.

●

FLASH SELECT

✤

The FLASH SELECT function works in CAM and M.REC mode.

1. Set the camcorder to CAM mode.
2. Press the MENU button.

■

The menu list will appear

3. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR.
4. Select FLASH SELECT from the submenu and push the MENU SELECTOR.
5. Using the MENU SELECTOR, Select the FLASH SELECT mode.

■

Push the MENU SELECTOR to confirm the FLASH SELECT mode.

6. To exit, press the MENU button.

Warning!

■

Do not fire the flash with the flash bulb covered with your hand.

■

Do not fire the flash close to people’s eyes.

Note

■

While using the following functions, you cannot use the FLASH function:
-

PROGRAM AE, SHUTTER SPEED, EXPOSURE, STROBE (DSE function), 
SLOW SHUTTER, CONTINUOUS SHOT

-

When you are recording movies onto a tape.

■

If the flash is forced to fire (Flash on) in a bright location, the effect of flash photography sometimes
may not be obtained.

■

When         (Red-eye reduction auto) is set, the flash fires to perform flash exposure compensation
between the pre-firing for red-eye reduction and the main firing for taking photos. It takes about 3
second between the pre-firing for red-eye reduction and the main firing.

CAM  MODE

INITIAL

PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT

CAMERA
A/V
MEMORY
VIEWER

CAM  MODE

PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT

CAMERA SET

CAM  MODE

FLASH SELECT

AUTO
FLASH ON
RED EYE REDUCTION

CAMERA SET

Using the Built - in Flash

SCD99 UK (28~63)  6/17/03 11:55 AM  Page 52

Содержание SC-D99





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды