manualshive.com logo in svg

Samsung SC-D99, Инструкция для владельца

Поделиться
Скачать
Samsung SC-D99 Скачать руководство пользователя страница 13

-  Make sure that the battery pack is fully charged before starting to record.
-  To preserve battery power, keep your camcorder turned off when you are not

operating it.

-  If your camcorder is in CAM mode, and it is left in STBY mode without being

operated for more than 5 minutes with a tape installed, it will automatically turn
itself off to protect against unnecessary battery discharge.

-  Make sure that the battery pack is fitted firmly into place.

Dropping the battery pack may damage it.

-

A brand new battery pack is not charged.
Before using the battery pack, you need to charge it completely.

-

It is a good idea to use the viewfinder rather than the LCD when making a long recordings, 
because the LCD uses up more battery power.

* When the battery reaches the end of its life, please contact your local dealer.

The batteries have to be dealt with as chemical waste.

-

To ensure normal recording and a clear picture, clean the video heads regularly.
If a square block-shape distorts playback, or only a blue screen is displayed, the video heads may be dirty.
If this happens, clean the video heads with a dry type cleaning cassette.

-  Do not use a wet-type cleaning cassette. It may damage the video heads.

ENGLISH

Notes and Safety Instructions

8

8

Notes regarding the battery pack

Notes regarding the Video Head Cleaning

SCD99 UK (01~27)  6/17/03 11:52 AM  Page 8

Содержание SC-D99





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды