67
System
Main menu
Sub menu
Settings
Description
System
Setup
Go through the initial setup steps like you did the first time you used this product.
―
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the
Change PIN
function.
Time
Clock Set
Select
Clock Set
. Select
Date
or
Time
, and then press
E
.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press
E
when done.
―
You can set the
Date
and
Time
directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
―
Start Date
,
End Date
and
Time Offset
are enabled only when
DST
is set to
Manual
.
Sleep Timer
Automatically shuts off the product after a preset period of time.
―
Use the up and down arrows to select a period of time, and then press
E
. To cancel
Sleep Timer
, select
Off
.
Auto Source Switching
Auto Source Switching
When the
Auto Source Switching
is
On
, the display video source will automatically be searched for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
Secondary Source
selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the
Primary Source
selection is set to
All
, the display will search all the video source inputs twice in
sequence looking for an active video source, returning back to the first video source in the sequence if no video
is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
―
The
Primary Source Recovery
function is disabled if
Primary Source
is set to
All
.
Primary Source
Specify
Primary Source
for the automatic input source.
