- 11 -
Checking the space around the product
Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause
fire and damage the product. Maintain enough space around the product as shown in the diagram when installing
the product.
"
The exterior may differ depending on the product.
15 cm
15 cm
147.4 cm
15 cm
15 cm
15 cm
125.2 cm
15 cm
15 cm
148.9 cm
148.9 cm
Adjusting the Product Tilt and Height
"
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to
improve quality.
-10
˚(
±2.0
˚) ~
10
˚(
±2.0
˚)
0
~
270.0 mm (±5.0mm)
0
~
30.0 mm (±5.0 mm)
-13
˚(
±2.0
˚) ~
10
˚(
±2.0
˚)
●
The product tilt and height can be adjusted.
●
The stand may slightly move at the stopped position while adjusting the height. This occurs as the pneumatic
pressure is adjusted and is not a failure. This issue can be reduced by moving the product slowly.
●
When adjusting the stand height, you may hear a noise. This noise is generated because the ball inside the
stand slides when the stand height is adjusted. It is a normal noise and not a product malfunction.
●
When adjusting the height, be careful and ensure that a cable is not caught in the gap.
