37
DisplayPort Ver.
Select the DisplayPort version to use.
―
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
―
If the product (when set to
DisplayPort
) is displaying the message
Check the cable connection and the
settings of the source device.
press the JOG button to display the function-button screen and then select
→
System
→
DisplayPort Ver.
→
1.1
or
1.2↑
.
HDMI Mode
Select the HDMI mode to use.
―
The supportable device and resolution may differ depending on its version.
―
When the version is changed, the screen may blink.
―
If you set the
HDMI Mode
to
1.4
, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
―
When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
―
This menu is not available when
PIP/PBP Mode
is set to
On
and the
Size
is set to
(PBP Mode).
Eco Saving Plus
The
Eco Saving Plus
function reduces power consumption by controlling the electric current used by
the product panel.
―
This option is not available when
SAMSUNG
MAGIC
Bright
is in
Dynamic Contrast
mode.
―
This menu is not available when
Game Mode
is enabled.
―
This menu is not available when
Eye Saver Mode
is enabled.
―
Not available when
PIP/PBP Mode
is set to
On
.
•
Off
: Deactivate the
Eco Saving Plus
function.
•
Auto
: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low
: The power consumption will be reduced by 25% over the default setting.
•
High
: The power consumption will be reduced by 50% over the default setting.
