21
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is
facing downwards.
―
The exterior may differ depending on the product.
―
The table should be relocated, depending on the space where the stand will be installed.
―
Attach the stand to the product and tidy up the cables.
Caution
Do not press down on the product. There is a risk
of damaging the product.
Before placing the product facing down to the
table, put a cushion on the table to protect the
product screen.
1
3
4
Make sure the product front faces down, as shown
in the figure.
Attach and fix the stand to the rear of the product
by using the screws.
Attach the Cover-Clean Back Stand.
After attaching the stand to the product, tidy up
the cables.
―
For details on how to tidy up cables, refer to “
5
6
7
Install the stand on the table, as shown in the
figure.
―
Before installing the stand, adjust the handle to fit
the table thickness for easier installation.
After installing the stand on the table, turn the
clamp to the right to engage the lock.
―
If you turn it to the left, the lock will be disengaged.
The stand is now completely assembled.
