background image

32

Size

Select the size and aspect ratio of the sub-screen.

 

S27R75*: 

 / 

 / 

 

S32R75*: 

 / 

 / 

 / 

Position

Select the position of the sub-screen from the available options.

 

 / 

 / 

 / 

 

Not available when PBP is selected.

 

The screen may flicker if the input source is unstable.

Picture Size

Select the image size for each screen.

PBP Mode (available in PBP mode(

Size

 

))

In 

PC

 mode

 

Auto

: Display the picture according to the aspect ratio of the each screen input source.

 

Wide

: Display the picture in full screen regardless of the aspect ratio of the each screen input 

source.

In 

AV

 mode

 

4:3

: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and 

standard broadcasts.

 

16:9

: Display the picture of the sub-screen with an aspect ratio of 16:9.

 

Screen Fit

: Display the picture of the sub-screen with the original aspect ratio without cutting 

anything off.

 

The function may not be supported depending on the ports provided with the product.

 

Changing the screen size is available when the following conditions are satisfied.

 

The input source is 480p, 576p, 720p, or 1080p and product can display normally (Not every model can 
support all of these signals.).

 

This can only be set when the external input is connected through HDMI/MINI DP and 

PC/AV Mode

 is set 

to 

AV

.

Содержание S32R75 Series




















































Отзывы: