operating
_13
02 OPERA
TING
( 4 )
( 4 )
Lighting/
Lighting/
Hold 3
Hold 3
sec for
sec for
C
C
↔
↔
F
F
Touching the Lighting button turns on the
Dispenser LED lamp (under the display)
in continuous mode so that it stays on
continuously. The button also lights up. If
you want the Dispenser lamp to come on
only when some one uses the dispenser,
press the Lighting button to turn the
continuous mode off.
Touch and hold this button for 3 seconds
to switch the temperature units between
°C and °F
( 5 )
( 5 )
Fridge
Fridge
(Hold 3 sec
(Hold 3 sec
for Power
for Power
Cool)
Cool)
Touch this button to set the Fridge
temperature.
You can set the temperature between 1°C
and 7°C.
Touch and hold the this button for 3
seconds to decrease the time needed to
cool products in the Refrigerator. This can
be helpful if you need to cool easily spoiled
items quickly or if the temperature in the
fridge has warmed dramatically
(For example, if the door was left open).
( 6 )
( 6 )
Ice Off
Ice Off
(Hold 3 sec
(Hold 3 sec
for child
for child
lock)
lock)
If you don’t want to make more ice, touch
this button. Also, pressing and holding this
button for 3 second locks the display panel
and dispenser buttons so the buttons can
not be used. The Child Lock icon lights up
to indicate you’ve activated the Child Lock
function.
(7)
(7)
Ice Type
Ice Type
Touch this button to select your desired
ice type. Cubed and crushed ice modes
alternate each time you press the Ice Type
button.
Note that when you push the Ice Type
button, you turn the Water dispenser off.
USING THE CONTROL PANEL
( 1 )
( 1 )
Energy
Energy
Saver
Saver
Touching this button turns Energy Saver
mode on and off. When you turn Energy
Saver on, the Energy Saver icon lights up.
Turn Energy Saver off, and the icon goes
off. The Energy Saver function turns on
automatically when power is supplied to
the refrigerator.
If condensation or water drops appear on
the doors, turn the Energy Saver mode off.
( 2 )
( 2 )
Freezer
Freezer
(Hold 3 sec
(Hold 3 sec
for Power
for Power
Freeze)
Freeze)
Touch this button to set the Freezer
temperature.
You can set the temperature between
-14°C and -23°C.
Touch and hold this button for 3 seconds
to decrease the time needed to freeze
products in the Freezer. It can be helpful
if you need to freeze easily spoiled items
quickly or if the temperature in the Freezer
has warmed dramatically (For example, if
the door was left open).
( 3 )
( 3 )
Alarm /
Alarm /
Hold 3
Hold 3
sec for
sec for
Filter
Filter
Reset
Reset
This button serves two purposes:
1)
To turn the door open alarm on
and off.
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes. The beeping
stops when you close the door. The door
alarm function is pre-set to On in the
factory. You can turn it off by touching and
then releasing this button. You can turn
it back on in the same fashion. The icon
lights up when the function is on.
2)
After you replace the water filter,
Touch and hold this button for 3
seconds to reset the water filter
life indicator.
operating the SAMSUNG side-
by-side refrigerator
9
10
1
2
3
7
4
5
6
8
