Samsung RHF025EE Series, Руководство по установке

Страница: 12 / 30

E-
12
Electric Wiring
Electric Wiring (Continued)
1 Remove the 4 screws on the electrical component box and open the cover plate.
2 Connect the cables correctly as seen in the picture.

Fix the cables with a cable tie.
3 Connect the cable to the terminal board with a compressed ring terminal.

Fix the screws in the electrical component box with designated torque
referring to the table.
Size M5 Bolt M6 Bolt
Recommended size
N·m 1.34~2.0 1.67~2.5
kgf·cm 13.4~20.0 16.7~25.0
Connect to ERV wired remote control
Connect to power supply wire
Fixing part of electrical wires
Compressed ring terminal
Cable
Electrical component box
Screw
Screw
Electrical component box
Cable fixation
Maintenence cover
 Do not wash the heat exchange element. It may decrease the efficiency.

Make sure to use rated cable for power supply and do not extend or cut
the cord.

The unit should be installed in accordance with the National Electrical
regulations. Ensure that the national safety code requirements have been
followed for the main supply circuit.
CAUTION
RHF_025EE_IM_E_27512_1.indd 12 2007-04-18 ｿﾀﾈﾄ 5:43:31