English - 26
3. Push the SodaStream 60 L Carbonator into the Support.
4. Lock the SodaStream 60 L Carbonator into place by pressing the Lever.
• The inner pressure of the Carbonator may make it difficult to press the
lever down. Hold the lever as shown in the illustration on the right, and
then push down.
• If you don’t lock the Carbonator into place, the refrigerator won’t produce
sparkling water.
• If the Carbonator is not tightly connected to the Regulator, it will leak CO
2
gas, producing a hiss. If this occurs, repeat Steps 2, 3, and 4, making
sure that the Carbonator is firmly attached and locked into place.
5. Press the Sparkling Maker button 3 seconds to run the Sparkling Making function. Wait about
20 minutes. (the amount of time needed for a medium level of carbonation) while the refrigerator
makes sparkling water.
• To make sparkling water, the refrigerator injects CO
2
from the CO
2
cylinder into water stored in the
Sparkling Water tank. The water enters the tank through the refrigerator’s water supply line.
Press 3
seconds
6. To remove any residual substances that may be in the water, dispense 2 or 3 large glass fulls of
Sparkling Water and empty them into a sink.
For more information about using the Sparkling Water function, see Using the Sparkling Water Function.
DA68-03013B (EN)-06-���.indd 26
2015. 8. 26. �� 10:00
