English - 24
Connecting the water line to the
refrigerator
1. Remove the cap from the water line on the unit
and insert the compression nut of the water line
into the water line on the unit.
2. Connect the water line on the unit with the
water line in the kit .
3. Tighten the compression nut onto the
compression fitting. There should be no gaps
between (A, B & C )
4. Turn water on and check for any leakage.
• Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 6.5 mm of the plastic
tubing to make sure you get a snug,
leak-free connection.
Remove
cap
Water Line
from unit
Water Line
from Kit
No gap
Loosen a
Before being used, the leakage in these
places should be examined.
• Samsung Warranty does not cover WATER
LINE INSTALLATION.
• It will be done at customer’s charge unless the
retail price includes installation cost.
• Please contact Plumber or Authorized Installer
for the installation if needed.
• If Water leakage occurs due to improper
installation, Please contact installer.
CAUTION
DA68-03013B (EN)-06-���.indd 24
2015. 8. 26. �� 10:00
