Samsung RF25HM, Руководство пользователя

Страница: 10 / 116

English - 10
<RF25HM**>
56 1/4”
(1430 mm)
11 6/8”
(300 mm)
125° 125°
2” (50 mm)
32 3/4” (830 mm)
29 5/8”
(753
mm)
47 2/8” (1200
mm)
4 2/8” (106 mm)
1 6/8” (45 mm)
52 5/8” (1335
mm)
Each measurement based on the design
dimension, so it may differ depending on
the measuring method.
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to ‘Adjusting the doors’ on page 14.
Flat-blade screw
driver(-)
Control Lever
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator. To protect the finish of the flooring, cut
a large section of the cardboard carton and place
it under the refrigerator where you are working.
When moving a refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
REQUIRED TOOLS
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screw)
Flat-blade
screwdriver(-)
Socket wrench
(13/32”) (10 mm)
Allen wrench
(3/16”) (5 mm)
DA68-02601G-00.indb 10 2014. 12. 4. �� 3:05