Samsung RF18A Series Скачать руководство пользователя страница 2

Страница: 2 / 111

WARNING

IMPORTANT SAFETY NOTICE

The service guide is for professional repairers who have technical competence to

repair refrigerating appliances and comply with all applicable regulations for

repairers of electrical equipment.

Any attempt to repair the appliance by a non-professional repairer may result in

personal injury and property damage.

The manufacturer or dealer will not be held responsible for the interpretation of

this information.

part in any form whatsoever without the written permission of the SAMSUNG

ELECTRONICS Company.

Samsung is not liable for any damage to product, any injury or any other product

safety issue caused by any attempt to repair the product which does not carefully

follow these repair and maintenance instructions or carried out by a non-

authorized service provider, self-repair or non-professional repair of the product,

Any damage to the product caused by an attempt to repair the product by any

person other than a Samsung authorises service provider will not be covered by

the warranty.

For information about purchasing parts and tools,

please visit

http://samsung.com/support

SAMSUNG ELECTRONIC, INC.

Technical Service Guide

Содержание RF18A Series
















































































































Результаты поиска

Содержание RF18A Series

Отзывы:

Samsung RF18A Series, Руководство по обслуживанию, Страница: 2 / 111

Результаты поиска

Содержание RF18A Series

Отзывы: