background image

14

 · Installation

How to Install

CAUTION: If you use the system to watch a young child, do not place the camera in the 
child's reach. 

Wireless Monitor

1. 

Place the monitor in a place that will have clear 
reception with your camera(s).

2. 

Pull out the stand.

 

n

 

`

Do not pull up the stand lever with an excessive 
force.

Wireless Camera

Before you install the camera, carefully plan where and how it will be positioned, and 
where you will route the cable that connects the camera to the power adapter. 
Before starting permanent installation, verify its performance by observing the image 
on the monitor when camera is positioned in the same location/position where it will be 
permanently installed and the monitor is placed in the location where it will be used 
most of the time.

Installation Warnings

Aim the camera(s) to best optimize the viewing area: Select a location for the camera 
that provides a clear view of the area you want to monitor, which is free from dust, and 
is not in line-of-sight to a strong light source or direct sunlight.

Avoid installing the camera where there are thick walls or obstructions between the 
camera and the monitor.

STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or 
cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. 
Only use the AC Adapters provided.

1. 

Carefully unpack the camera. 

If you are installing cameras that did not come with the system, please see the 
pairing camera section of this manual for details on installation.

2. 

Mount the camera to the wall. 

Mark the position of the screw holes on the wall, and 
drill holes and insert 2 screws, then firmly attach the 
camera to the wall by placing the stand over the 
installed screws and pushing the base downwards.

 

n

 

`

To install on a concrete wall, drill a hole and use plastic 
anchor to fix.

 

`

Use the drilling template to drill holes on the wall for 
camera installation. (Page 18)

 

`

The camera can also be placed on a flat surface, such 
as a table or shelf, and no mounting hardware is 
required.

3. 

Adjust the viewing angle of the camera.

 

n

 

`

Adjusting the camera with excessive force may 
damage the unit.

 I

NSTALLATION

 

ON

OFF

ON

OFF

F

ON

ON

OFF

OFF

O

O

OF

OF

FF

ON

OFF

Содержание RealVIEW SEW-3042WN





















Отзывы: