Samsung QN Q65FNF Series, Руководство по обслуживанию

Страница: 46 / 182

3-2
3. Disassembly and Reassemble
Description & Screws Picture Description
3
Use Open Jig to release tape in corners and
all clips as indicated in red on sides and top &
bottom.
Gently lift up the Rear Cover starting at the
top being careful of function assembly at the
bottom.
When the 4 points ( • )Hook is broken.
Although the hook is broken, the appearance
of the Rear cover is no problem and Gap
problem is not appeard after re-assembly.
To prevent the Inner Hook's broken. •
1. Catch the upper section of the rear cover.
2. Open the rear cover from top to bottom.
If the wire is bent, need to change the wire.
•
Open Jigs
BN81-12884A BN81-14946A
<Bottom Conner>
Jig Dir
ect
ion
Jig Dir
ect
ion
Jig Direction
Locking tabs locations
49" •
Bottom
: 8 point Locking
Top
: 10 point Locking
L
: 6 point L
ock
ing
R
: 6 point L
ock
ing
Top Corner
: 2 point (Snap Hook)
Side AV
: 1 Point Locking
55" •
Bottom
: 8 point Locking
Top
: 10 point Locking
L
: 6 point L
ock
ing
R
: 6 point L
ock
ing
Top Corner
: 2 point (Snap Hook)
Side AV
: 1 Point Locking