English - 7
Connecting to the TV
In order to operate the TV using a Smart Touch Control unit, you must fi rst pair it to the TV via Bluetooth.
1.
When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV
button for the fi rst pairing. Only this buttons sends an IR signal. The remote control receiver's location may vary
depending on the model.
2.
A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect
to the Smart Touch Control unit automatically.
<Attempting to connect and completion icons>
Reconnecting the Smart Touch Control Unit
<The Smart Touch Control unit's pairing button>
If you need to restablish the connection between the TV and the Smart Touch Control unit, press
the pairing button at the back of the Smart Touch Control toward the Remote receiver of the TV.
The pairing button can be accessed by removing the control unit's battery cover. Pressing the
pairing button automatically reestablishes the connection between the control unit and the TV.
Low Battery Power Warning
<Low battery alarm window>
When the Smart Touch Control’s battery power is low, the indicator shown (in the illustration) below
appears on the bottom left of the TV screen. Replace them with new alkaline batteries to extend the
battery life.
Inserting the Batteries (AAA X 2)
1.
Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover’s notch with a
fi ngernail to remove the cover completely.
2.
Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3.
Align the battery cover with the back of the remote control and press down along the edges until it is cleanly
attached to the remote control.
[PF8500-RD]BN68-04829G-00Eng.indb 7
2013-02-26 �� 9:53:27
