English - 26
continued...
Basic Functions
6.
Program Information
EPG-Electronic Program Guide
The electronic program guide gives you a programme list for the channels.
➢
1. This service depends on service provider.
2. After receiver recognized the GMT - time from the signal which takes
few seconds, it can display correct EPG information.
• Press the
GUIDE
button while you are viewing a program.
This function is displayed on the screen by using only time.
•
RED
button: Red button is for moving back to the previous date.
•
GREEN
button: Green button is for moving to the next coming date.
•
INFO
button: This button is used to watch the program information, if there
is more information than one page. Use the
…
or
†
buttons to move up
and down pages.
•
œ
or
√
button: Use to display the program list by 30 minutes per block.
Time interval can be adjusted by pressing buttons as followings on EPG
screen:
1 button: 1 hour and 30 minutes
2 button: 30 minutes
3 button: 15 minutes
• Select the channel by pressing the
…
or
†
buttons and press the
ENTER/OK
(
) button to watch this channel.
Operating the DTV Menu
Main Menu
After installing your antenna system and TV with appropriate connectors.
• Plug in the AC main power and switch on the TV.
• Press the
D.MENU
button to bring up the main menu.
The following on-screen display will appear:
The sub menu topics will be displayed. For the sub-menus
Installation
,
Channel Organising
and
Parental Lock
, you need the PIN Code.
1.
Installation
This menu consists of 4 sub-menus:
Select Country, Auto Scanning, Manual Scanning and Reset to Factory
Defaults.
• Select
Installation
by pressing the
ENTER/OK
(
) button in the
main menu mode to select the sub menu.
• Enter the PIN Code.
➢
If you have not entered your own PIN Code then the PIN Code 0000
applies, which was set at the factory.
➢
Once you have entered PIN Code, you do not have to input the code
again unless you turn the TV power off.
Installation
Channel Organising
Parental Lock
System Setup
Installation >
Installation
Channel Organising
Parental Lock
System Setup
Select Country
Auto Scanning
Manual Scanning
Reset to Factory Defaults
Installation >
Select Country
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 26