OfficeServ 7100
INSTALLATION
TECHNICAL MANUAL
PART 2 MAY 2010
2.9
2.5.2 Wall Installation
CAUTION:
Only mount OfficeServ 7100 onto a wall capable of supporting the 7100
cabinet, associated blocks, cables and peripheral equipment.
1) There are four holes for the screws on the top/bottom of the bracket (see positions
marked ‘A’ in the figure below). Mark four holes on a desired wall by using the bracket.
Figure 2.13 Installation on a Wall (1)
2) Make holes on the marked positions of the wall mount bracket. Make the depths and the
diameters of the holes more than 35mm and around 5.5mm such that the plastic anchors
can be inserted.
Figure 2.14 Installation on a Wall (2)
A
A
Home Page
Table of Contents
Home Page
Table of Contents