14 English
Be
for
e y
ou s
tar
t
Before you start
Virtual flame technology
Virtual flame technology creates the
appearance of flames when you turn on an
induction element.
•
Virtual flame technology is available only on the front-right cooking zone.
•
The virtual flame may look different depending on the appearance, size, or
position of the cookware. (For the best results, use cookware that matches the
element size. Cookware that is too large can cover the virtual flame. Cookware
that is too small can cause the virtual flame to be ill-formed.
•
Impurities on the cookware bottom or the hob surface can cause the virtual
flame to be ill-formed or incomplete.
Clean the cookware or the hob surface before using them.
NOTE
If you want to turn off Virtual Flame technology, you must touch the button for
3 seconds within 10 seconds after turning on the hob.
This function is available only immediately after turn on the hob. After another
action can not be set to function.
NOTE
Use a suitable cookware when using Virtual flame burner.
Size
200-220 mm
Cookware surface
Horizontal hairline
Material
STSS (Stainless steel)
When conditions are satisfied upper table, Virtual Flame shape can be formed
appropriately.
Induction heating
A
B
C
A.
Induction coil
B.
Induced currents
C.
Electronic circuits
•
The Principle of Induction Heating
:
When you place your cookware on a
cooking zone and you turn it on, the
electronic circuits in your induction
hob produce “induced currents” in the
bottom of the cookware which instantly
raise cookware’s temperature.
•
Greater speed in cooking and frying
:
As the pan is heated directly and not
the glass, the efficiency is greater than
in other systems because no heat is
lost. Most of the energy absorbed is
transformed into heat.
NZ6000K NZ64N9777_NZ64N7777_DG68-01073A-00_EN+FI+NO+DA+SV.indb 14
2/19/2018 12:02:16 PM
