English 23
Oper
ation
4.
To cancel the timer settings, select
the corresponding cooking zone and
touch the
button for 2 seconds. This
will cancel the cooking zone timer
settings with a beep. If you touch the
button for 2 seconds without selecting
a burner, this will cancel the timer
settings of the most recently changed
cooking zone.
NOTE
•
To display the time remaining for any of the cooking zones, touch the selected
cooking zones.
•
The settings are reset using the
Timer setting
( or ) button. After the set
period of time has elapsed, the cooking zone automatically switches itself off,
an acoustic signal sounds as confirmation and the timer display indicates.
•
To change the settings quicker, touch and hold
Timer setting
( or ) button
until the desired value is reached.
Pause/Resume
The
Pause/Resume
function simultaneously switches all cooking zones that are
switched on to the low power setting and then back to the power level that was
previously set. This function can be used to briefly interrupt and then continue the
cooking process e.g. to take a telephone call.
When the
Pause/Resume
function is activated, all touch buttons except for the
,
,
, and the
buttons are disabled.
To resume cooking, touch the
button again.
Control Panel
Display
To Switch On
Touch the button
To Switch Off
Touch the button
Return to previous power level
Timer
Using the timer as a safety shutoff
If a specific time is set for a cooking zone, the cooking zone will shut itself off once
this period of time has elapsed. This function can be used for multiple cooking
zones simultaneously.
Setting the timer
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
1.
After switched on, touch the
corresponding cooking zone button to
activate the cooking zone.
2.
Touch the
button. The number 10
will be displayed above the timer
display. (The default setting of the timer
is 10.)
3.
Use the
Timer setting
( or ) button
to set the desired amount of time, for
example, 15 minutes, after which the
cooking zone will automatically switch
itself off. The safety shutoff is now
activated. (The timer can be set from 1
to 99.)
NZ6000K NZ64N9777_NZ64N7777_DG68-01073A-00_EN+FI+NO+DA+SV.indb 23
2/19/2018 12:02:24 PM
