26 English
Oper
ation
Operation
CORRECT
INCORRECT
Flat pan bottom & straight sides.
Curved or warped pan bottoms or
sides.
Pan size meets or exceeds the
recommended minimum size for the
Cooking Zone. See "Using the correct
size cookware".
Pan does not meet the minimum size
required for the Cooking Zone used.
See "Using the correct size cookware".
Pan rests completely on the Cooktop
surface.
Pan bottom rests on cooktop trim
or does not rest completely on the
cooktop surface.
Pan is properly balanced.
Heavy handle tilts pan.
NOTE
ANY one of the incorrect conditions listed above may be detected by the sensors
located below the ceramic cooktop surface. If the cookware does not meet one
or more of these conditions, one or more of the Cooking Zones will not heat, and
settings will flash in the affected Cooking Zone display. Correct the problems
before attempting to activate the cooktop.
Cookware for induction cooking zones
The Induction element can only be turned on when cookware with a magnetic
base is placed on one of the cooking zones. You can use the cookware identified as
suitable below.
Cookware material
Cookware material
Suitable
Steel, Enamelled steel
Yes
Cast iron
Yes
Stainless steel
If appropriately labelled by the manufacturer
Aluminium, Copper, Brass
No
Glass, Ceramic, Porcelain
No
NOTE
•
Cookware appropriate for induction cooking is labelled as suitable by the
manufacturer.
•
Certain cookware can make noise when being used on induction cooking
zones. These noises do not indicate that the cooktop is malfunctioning and do
not affect its operation in any way.
NZ36K7880U_DG68-00824A-04_EN+MES+CFR.indb 26
3/7/2018 5:20:41 PM
Содержание NZ36K7880UG
Страница 39: ...English 39 Memo NZ36K7880U_DG68 00824A 04_EN MES CFR indb 39 3 7 2018 5 20 43 PM ...
Страница 79: ...Español 39 Notas NZ36K7880U_DG68 00824A 04_EN MES CFR indb 39 3 7 2018 5 20 55 PM ...
Страница 119: ...Français 39 Notes NZ36K7880U_DG68 00824A 04_EN MES CFR indb 39 3 7 2018 5 21 08 PM ...