English 35
Maint
enanc
e
How to re-install the door
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentations
of the hinge arms into the bottom edges of the hinge slots. The notches in each
hinge arm must be fully inserted into the bottoms of each slot.
Hinge arm
Bottom edge of slot
Indentation
3.
Open the door fully. If the door will not open fully, the indentations are not
inserted correctly in the bottom edges of each slot.
4.
Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Hinge lock
Locked position
Unlocked position
5.
Close the oven door.
How to remove and re-install the Storage drawer
Storage drawer
1.
Pull out the drawer and remove any
stored content.
2.
While supporting the drawer, pull it out
until the top of the drawer sides come
out of the two nylon drawer guides.
Then, lift to remove the drawer.
3.
Clean the drawer with warm, soapy
water. Rinse and dry thoroughly.
4.
Place the top of both drawer sides in
the openings on the two nylon drawer
guides and push in enough to support
the drawer.
5.
Replace any stored content, and then
push in the drawer while slightly lifting
the front to close it.
NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 35
2019-05-30 6:11:15
Содержание NX58R9311SS/AA
