62
Using "PCoIP"
2
2 Using "PCoIP"
2.4.9
Wake On LAN
This feature allows you to power on the product by sending a pre-determined command from an external
system to the product over a network.
Make sure the network is capable of data communication with the PC that sends the command to the
product. Ensure you have a program that can generate
Wake on LAN
signals.
Make sure a power supply is always connected to ensure the feature works when the product is
turned off.
The feature is intended to power on the product. (It does not support the function to power off the
product.)
Configuring the settings
1
Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2
Enter the IP address set for the product in the URL address field on the PC to access the product
administrative web page.
3
To change the power settings, log in (
Log In
) and select
Configuration
Power
.
4
Configure the settings to suit the environment in which the product is used. (See the image below.)
