57
Using "PCoIP"
2
2 Using "PCoIP"
Display Topology Tab
To apply the
Display Topology
feature to a PCoIP session between a zero client and a PCoIP host,
you must have the PCoIP host software installed on the host. Refer to the "PCoIP Host Software for
Windows User Guide: TER0810001" for more details.
The
Display Topology
tab has no corresponding menu in the Administration Web Interface.
For details about the
Display Topology
feature for a PCoIP session between a host card and a zero
client, refer to the "PCoIP Host Software for Windows User Guide: TER0810001".
Always change the
Display Topology
settings using the
Display Topology
tab on the zero client OSD
Options
User Settings interface
.
Figure 2-24:
Display Topology
Configuration
Enable Configuration
The device can be configured with display position, rotation and resolution settings if enabled.
The settings are saved when you click
Apply
or
OK
and are applied when the device is reset.
Display Layout
Select whether you want a horizontal or vertical layout for your displays (A and B). This setting should
reflect the physical layout of the displays on your desk.
Horizontal
: Select to arrange A and B horizontally, with A located to the left of B.
Vertical
: Select to arrange A and B vertically, with A located above B.
A maximum of two displays can be enabled at the same time.
