35
Using "PCoIP"
2
2 Using "PCoIP"
IPv6 Tab
The
IPv6
page lets you enable IPv6 for PCoIP devices connected to your IPv6 network.
When you make a change to one of the settings on this page, you must reboot your device for the
change to take effect.
Figure 2-4:
IPv6
Configuration
Enable IPv6
Enable this field to enable IPv6 for your PCoIP devices.
Link Local Address
This field is automatically populated.
Gateway
Enter the gateway address.
Enable DHCPv6
Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device.
Primary DNS
The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated
by the DHCPv6 server.
Secondary DNS
The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
Domain Name
The domain name used (e.g., 'domain.local') for the host or client. If DHCPv6 is enabled, this field is
automatically populated by the DHCPv6 server.