22 English
Maint
enanc
e
Maintenance
Replacement
Bulbs
1.
Remove the glass cap by turning anti-
clockwise.
2.
Replace the oven light.
3.
Clean the glass cap.
4.
When done, follow step 1 above in the
reverse order to reinsert the glass cap.
WARNING
•
Before replacing a bulb, turn off the oven and unplug the power cord.
•
Use only 25-40 W / 220-240 V, 300 °C heat-resistant bulbs. You can purchase
approved bulbs at a local Samsung service center.
•
Always use a dry cloth when handling a halogen bulb. This is to prevent the
bulb from being tampered with fingerprints or sweat, resulting in a shortened
lifecycle.
Telescopic rails (applicable models only)
1.
On the left Side runner, gently press the
upper side of the rail to remove in the
arrow direction.
2.
Repeat the above step on the right Side
runner to remove the right rail.
3.
Clean the left and right Telescopic rails
with soapy water and a cloth.
01
02
01
Front
02
Rear
4.
When cleaning is complete, reinsert both
Telescopic rails by repeating steps 1-2
above in the reverse order.
Make sure the front and rear clips of the
rail fit into the Side runner.
NOTE
It is recommended to insert the Telescopic
rail into level 3 on the Side runner.
NV75R3143BS_EU_DG68-00618R-00_EN.indd 22
2019-04-18 PM 3:27:41
