7
5
Click
General
tab and select a LAN driver from
Connect using:
. Select
Internet Protocol(TCP/IP)
and click
Properties
.
Note
The displayed LAN driver may vary depending on
the LAN device type.
Click
Install
to add a network component as shown
in the figure below: You can add a client, a service,
or a protocol.
6
Configure IP settings.
Select
Obtain an IP address automatically
when
using DHCP. If you use a static IP, select
Use the
following IP address
and enter the values.
Note
If the IP of your computer is not automatically
assigned, contact the network administrator.
7
If all settings are made, click
OK
. Now the network
configuration is finished.
Содержание NP-X22
Страница 1: ...User Guide X22...