160
Click
My Network Place> View network
connections
on the Desktop.
Right-click over
Wireless Network Connection
and select
Disable
.
A2
The <Wake On LAN> function is configured so that
it is supported in
Standby
mode (S3). To use this
function in
Hibernation
mode (S4) or in the Turn Off
(S5) state, configure it as follows:
Enter
BIOS SETUP
and select the
Boot
menu.
Move to the
Wake On Lan
item and press the
Enter
key. Change it from
Disabled to Enabled
and press the
Enter
key.
Q
When I connected 100Mbps wired LAN and
the computer exits standby/hibernate mode,
a message informing 10Mbps wired LAN
connection appears.
A
When the computer exits standby/hibernate mode,
restoring the network takes about 3 seconds. When
the network is restored, it operates in 100Mbps.
Q
I cannot find an AP.
▶
Check the Wireless LAN LED.
A
Check if the Wireless LAN LED is on. If off, press the
Wireless LAN On/Off
button
<Fn>+<F9>
to turn it
on.
▶
Reinstall the driver.
A
Reinstall the driver using the software media.
▶
Check the Wireless Zero Configuration (WZC)
service.
A
If the “Windows cannot make this wireless
connection” message appears while searching for
wireless networks, it indicates that a program other
than Windows is set to manage the wireless LAN
settings.
▶
To use the wireless LAN settings using Windows:
A
Click
Start > Control Panel > Network and
Internet Connections > Network Connections
> Wireless LAN Connection
, right-click and
check if the “Windows manages wireless network
settings (W)” option is selected in the
Wireless
Network
tab of the
Properties
window. If not,
select the option.
Wireless LAN Related
Содержание NP-X22
Страница 1: ...User Guide X22...
