Troubleshooting 123
A
Set
Avivo Video > Theater Mode > Theater Mode Setting
to
Full Screen
in
the
CCI Options
.
Q14 If I run the Catalyst Control Center of the graphics driver, it appears on the
screen after some time.
A
Since the Catalyst Control Center is developed based on the .Net Framework of
Microsoft, some time is required to define the .Net Framework settings when
launched for the first time.
Q15 I have connected a TV with a cable that converts S-Video to Composite, but
the picture is displayed abnormally on the screen.
A
This system supports connecting a TV with an S-Video or Component cable but
does not support connecting a TV through a Composite interface with a cable that
converts S-Video to Composite.
Q16 If I change the graphics settings using the Display Settings Wizard of the
graphics driver, the setting window goes back and hidden.
A
This is a problem due to the design of the graphics driver. If a user clicks on the
Apply button after setting the graphics settings using the Settings Wizard, the
final Finish screen goes back and is hidden.
Q17 The picture is abnormally displayed on the screen when the computer is
resumed in Standby mode. (This only applies to Intel graphics cards.)
A
This may happen when the CRT is set as the Primary device in the Extended
Desktop Settings.
When the CRT is set as Primary and the LCD as Secondary, the picture may be
displayed abnormally if the system enters Standby mode, is restarted after
disconnecting the CRT and the resolution is changed. It is recommended setting
the LCD as the Primary Display Device.
Q18 <Fn>+<F4/
> Key combination does not work.
A
While displaying video of VCD or MPEG, or the display setting is Dual View,
you cannot toggle display devices. Also the installation of NetWare Client 32
program disables the function of <Fn>+<F4/
>.