122 Users Manual
A
If a TV is used as the display device, some programs such as Debug, Mem, etc.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
Q8
The Taskbar on the bottom of the screen does not appear when a projector
is used as the display device.
A
It may happen that even though the Wide LCD supports the resolution, the
projector does not support the resolution. In this case, change the system
resolution to 1024 x 768 pixels (recommended).
Q9
When a TV is connected, the Turn off monitor power option is not
performed.
A
When connecting a TV after booting up your computer, the Turn off monitor
power option may not be performed. For it to operate properly, it is recommended
to connect a TV and then booting up the computer.
Q10 The shortcut icon does not appear on the screen.
A
The shortcut icon appears only when Magic Keyboard and the Samsung Display
Manager program are installed.
Q11 I cannot set up Dual View properly. (For Intel Graphics only.)
A
This may happen when Clone mode is selected for an external monitor.
Press the
<Fn>
+
<F4>
key combination to select LCD and try to set up Dual
View again.
Q12 The screen is rotated, but I cannot return it to the original orientation.
(This
only applies to Intel graphics cards.)
A
This may happen when you have used the screen pivot function or pressed a
wrong key while using the computer. For Intel Graphics, press the
Ctrl+Alt+Direction Key (
↑
: rotate 0 degrees,
→
: rotate 270 degrees,
↓
: rotate
180 degrees,
←
: rotate 90 degrees)to return to the original orientation.
Q13 While playing a video in the LCD/CRT status, and I change the display
screen to Full Screen or move the display screen, black lines appear on the
secondary display device.