Samsung n102sp Скачать руководство пользователя

Страница: 79 / 118

Chapter 4.

Backup / Restore

System Software Functions

Samsung Recovery Solution provides system software so that

you can reinstall or copy the device drivers and system software

necessary for normal operations onto a separate storage device.

Restore Function

Not only can you use Samsung Recovery Solution when Windows

is running, but also when you are unable to boot up into Windows.

Let’s learn how to use Samsung Recovery Solution.
Optional functions such as Initial State Image, Initial Status Backup,

and Partitioning are only available in some models.
If the image of the initial state is saved on a DVD or removable

storage device, connect the DVD drive or removable storage

device to the computer before using the function.

Partition Setup & Initial Status Backup

If you turn your computer on for the fi rst time, the Initial Status

Backup function is performed after registering Windows. This

function saves an image of the Initial Status of the C drive to a

secure location so that users can restore the computer to the

Initial Status using the Complete Restore function. An Initial Status

Backup is only performed once immediately after the computer is

purchased.

If you turn the power on for the fi rst time, the Register

Windows screen appears. If you register Windows according

to the instructions on the screen, the computer will be

restarted.

After the computer has been restarted, the

Partition Setup

screen appears.
To resize the C and D drives, adjust the partition size using

the slide bar and the click

Next

The Partition Setup function is only available when the

computer is turned on for the fi rst time and will not

be available afterwards. Once you have completed the

partitioning, it cannot be resized. Partition the disk carefully.

The

Initial Status Backup

screen appears.

To continue the Initial Status Backup, click

Restart Now

. The

computer will restart.

The Initial Status Backup is performed to backup the initial

status of the C drive to a secure location. This backup image

is used for the Complete Restore function that restores your

computer to the initial status.

When the Initial Status Backup is complete, restart Windows.

Samsung Recovery Solution

(Optional)

Содержание n102sp























































































































Результаты поиска

Содержание n102sp

Отзывы:

Похожие инструкции для n102sp

Бренды по названию

Популярные бренды

Samsung n102sp, Руководство пользователя

Результаты поиска

Содержание n102sp

Отзывы:

Похожие инструкции для n102sp

Бренды по названию

Популярные бренды