Samsung n102sp Скачать руководство пользователя

Страница: 14 / 118

Chapter 1

Getting Started

Upgrade Related

Never disassemble the power supply or AC

adapter.

There is a danger of electric shock.

When removing the RTC (Real Time Clock)

battery, keep it out of the reach of children

as they could touch and/or swallow it.

There is a danger of choking. If a child has

swallowed it, contact a doctor immediately.

Use only authorized parts (multi-

plug, battery and memory) and never

disassemble parts.

There is a danger of damaging the product,

electric shock or fire hazard.

Before disassembling the computer,

shut down the computer and disconnect

all cables on the flat place. If there is a

modem, disconnect the phone line. If your

notebook is external & removable battery

type, remove the external battery.

Failure to do so, may cause electric shock.

If the computer is broken or dropped,

disconnect the power cord and contact a

service center for a safety check.
If the notebook computer has an external

type (removable) battery, separate the

battery also.

Using a broken computer may cause electric

shock or fire hazard.

Avoid direct sunlight when the computer

is in an air-tight location such as inside a

vehicle.

There is a danger of a fire hazard. The computer

may overheat and also present opportunity to

thieves.

Do not use your notebook PC for long

periods of time while any part of your

body is making direct contact with it. The

temperature of the product may increase

during normal operation.

This may result in harming or burning your skin.

Safety Precautions

Warning

Failure to follow instructions marked with this symbol may

cause personal injury and even fatality.

Содержание n102sp























































































































Результаты поиска

Содержание n102sp

Отзывы:

Похожие инструкции для n102sp

Бренды по названию

Популярные бренды

Samsung n102sp, Руководство пользователя

Результаты поиска

Содержание n102sp

Отзывы:

Похожие инструкции для n102sp

Бренды по названию

Популярные бренды