Samsung n102sp Скачать руководство пользователя

Страница: 10 / 118

Chapter 1

Getting Started

Connect the power cord to an outlet or

multiple power plug (extended cable) with

a ground terminal.

Failure to do so may result in electric shock.

If water or another substance enters

the power input jack, AC adapter or the

computer, disconnect the power cord and

contact the service center.
If the notebook computer has an external

type (removable) battery, separate the

battery also.

Damage to the device within the computer

may cause electric shock or fire hazard.

Keep the power cord or outlet clean so that

they are not covered with dust.

Failure to do so may result in fire.

AC Adapter Usage Precautions

Connect the power cord to the AC adapter

firmly.

Otherwise, there is a danger of fire due to an

incomplete contact.

Use only the AC adapter supplied with the

product.

Using another adapter may cause the screen to

flicker.

Do not place heavy objects or step onto

the power cord or AC adapter to avoid

damaging the power cord or AC adapter.

If the cord is damaged, there is a danger of

electric shock or fire.

Warning

Failure to follow instructions marked with this symbol may

cause personal injury and even fatality.

Safety Precautions

Содержание n102sp























































































































Результаты поиска

Содержание n102sp

Отзывы:

Похожие инструкции для n102sp

Бренды по названию

Популярные бренды

Samsung n102sp, Руководство пользователя

Результаты поиска

Содержание n102sp

Отзывы:

Похожие инструкции для n102sp

Бренды по названию

Популярные бренды