03
Functions
Listening to the Radio
To Store the Stations You Want
You can store up to: 15 FM stations.
1.
Select
FM
by pressing the
TUNER
button.
2.
To search for a station, press the
TUNING
MODE
button on the remote control or the
@
button on the main unit one or more times
until
MANUAL
is displayed.
3.
Press the
MO/ST
button to switch between
stereo and mono.
• In a poor reception area, select
MONO
for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
4.
Find a station by:
• Pressing and holding the
TUNING
1
/
2
or
,
/
.
button on the remote control
to automatically search for broadcasting
stations.
5.
If you do not want to store the radio station
found, go back to Step
3
and search for
another station.
Otherwise:
a.
Press the
MEMORY
button.
b.
Or, press the
TUNING
1
/
2
or
,
/
.
button on the remote control to select a
program number in the
PRESET
mode.
c.
Press the
MEMORY
button to save the
preset.
6.
To store other radio frequencies, repeat Steps
4
to
5
.
|
NOTE
|
✎
In Tuner mode
- In the
MANUAL
mode, you can use the
1
or
2
button.
- In the
PRESET
mode, you can use the
1
or
2
button on the main unit to search a
stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1.
Select
FM
by pressing the
TUNER
button on
the main unit or remote control.
2.
Press the
TUNING MODE
button on the
remote control or the
5
button on the main
unit one or more times until "
PRESET
" is
displayed.
3.
Press the
MEMORY
button on the main unit
or remote control, when the desired station is
displayed, then the station stored.
4.
Press the
1
,
2
buttons on the main unit or
the
TUNING
1
/
2
or
,
/
.
buttons on the
remote control to select a preset number.
or
You can use the
TUNING
1
/
2
or
,
/
.
button to select the stored station.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1.
Press the
TIMER SET
button on the remote
control twice. "
CLOCK SET
" is displayed.
2.
Press the
¬
button on the remote control.
The hour flashes.
• To increase the hours:
,
• To decrease the hours:
.
3.
When the correct hour is displayed, press the
¬
button, and then the minutes flash.
• To increase the minutes:
,
• To decrease the minutes:
.
4.
When the correct minute is displayed, press
the
¬
button. "
TIMER PLAY SET
" appears
in the display.
21
English
MX-JS8000-ZC_ENG-0412.indd 21
MX-JS8000-ZC_ENG-0412.indd 21
2016-04-12 10:16:49
2016-04-12 10:16:49
