Samsung MX-JS5000, Руководство пользователя

Страница: 22 / 31

Listening to the Radio
To Store the Stations You Want
You can store up to15 FM stations.
1.
Select FM by pressing the TUNER button.
2.
To search for a station, press the
TUNING
MODE
button on the remote control or the
STOP
button on the product one or more
times until MANUAL is displayed.
3.
Select a station by:
- Pressing and holding the
TUNING 1
,
2 button on the remote control
to automatically search for active
broadcasting stations.
4.
Press the
MO/ST
button to switch between
stereo and mono.
•
In a poor reception area, select
MONO
for a clear, interference-free broadcast.
•
This applies only when listening to an
FM station.
5.
If you do not want to store the radio
station found, go back to Step 3 and
search for another station.
Otherwise:
a.
Press the
MEMORY
button.
• FM
followed by a flashing number appears
in the display. That number is the current
preset number.
b.
Press the 1 , 2 button or the , , .
buttons to scroll through and select a
preset number.
• You can selec
t a number from 1 to 15.
c.
Press the ¬ button to save the preset.
6.
To store additional radio stations, repeat
Steps
3
to
5
.
|NOTES |
✎
In Tuner mode
- In the Manual mode, you can use the 1
or
2
button to change stations.
- In the Preset mode, you can use the
1
or 2 button to search for a stored radio
station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1.
Select
FM
by pressing the
TUNER
button
on the product or remote control.
2.
Press the
TUNING MODE
button on the
remote control until “
PRESET
” is displayed.
3.
Press
1
,
2
button on the main unit or
TUNING 1 , 2
on the remote control to
select a preset number.
Timer Function
Setting the Clock
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
1.
Press the
TIMER SET
button on the remote
control twice. "
CLOCK
" is displayed.
2.
Press the
¬
button on the remote
control. The hour flashes.
•
T
o increase the hours: ,
• To decrease the hours:
.
3.
When the correct hour is displayed, press
the
¬
button, and then the minutes
flash.
•
To increase the minutes: ,
•
To decrease the minutes: .
4. When the correct minute is displayed,
press the
¬
button, and then "
TIME
"
appears in the display.
Setting the Timer
The timer enables you to set the product to
switch on or off at specific times automatically.
•
Before setting the timer, confirm that the
current time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
•
If you no longer want the product to be
switched on or off automatically, cancel the
timer by pressing the
TIMER ON/OFF
button.
Functions
22
English
02793F-MX-JS5000-ZA-ENG-20150224.indd 22 2016/2/3 15:32:53