10
English
English
10
English
11
Checking or Editing the
Programmed Tracks
This function is not available during playback of an
MP3/WMA-CD.
•
You can program the playback order of up to 24
tracks of your choice.
•
However, you must stop playing the CD before
selecting tracks.
1.
While in CD playback mode, press the
STOP
(
@
)
button to stop playing the CD.
2.
Press the
ENTER
(
)
button to display the
message below:
(01= program number, --= track number)
3.
Use the
[
or
]
button to move to a desired
track.
•
Press
[
to move to the previous track.
•
Press
]
to move to the next track.
4.
Press the
ENTER
(
)
button to confirm your
selection, the selection is stored and
is displayed.
5.
To select additional tracks, follow Steps 3
to 4 above.
6.
Press the
PLAY
(
+
) button to play the
programmed tracks.
7.
Press the
STOP
(
@
) button to stop playing the
programmed tracks, Press the
STOP
(
@
) button
again to cancel playing the programmed tracks.
•
If you open the disc tray or turn off the
product, your programming will be canceled.
You can check a list of programmed tracks and
edit them as you want.
1.
If a programmed track is being played, press the
STOP (
@
) button once.
2.
Press the
ENTER
(
)
button twice to display
the message below:
(C=Check, 01= program number)
➣
If a total of 24 tracks are already pro-
grammed, “
C
” will be displayed rather
than “
P
” in the display.
3.
Press the
ENTER
(
)
button repeatedly until
the desired track is displayed.
4.
Press the
[
or
]
button to select a different
track.
5.
Press the
ENTER
(
)
button to confirm your
selection.
6.
To play the programmed tracks, press the
PLAY
(
+
) button.
You can repeatedly play back a designated section
of a CD.
1.
Press the
REPEAT A-B
button at the beginning
of desired part.
• 'RPT A'
will be displayed.
2.
Press the
REPEAT A-B
button at the ending of
desired part.
• 'RPT AB'
will be displayed.
3.
To cancel
REPEAT A-B
function, press the
REPEAT A-B
button again.
• 'OFF'
will be displayed.
➣
REPEAT A-B function is available only within a
track.
You can play a disc followed by a USB continuously.
1.
Press the
AUTO CHANGE
button on the main
unit.
Each time you press this button, the mode will
switch as follows:
AUTO CHANGE OFF
;
AUTO CHANGE ON
•
When the auto change mode is "ON", the unit will play
the Disc
;
USB continuously..
•
When the auto change mode is "ON", if you press
the
POWER
button, FUNCTION CHANGE button, or
the
OPEN/CLOSE
button, the auto change function
automatically switches to "OFF" mode.
•
When USB is playing, if you disconnected the USB,
the auto change function automatically switches to
"OFF" mode.
•
When the auto change mode is "ON", the unit cannot
record.
•
When the auto change mode is "ON", the REPEAT
and SLEEP functions automatically change to OFF.
•
When the auto change mode is "ON",
the USB REC,
REPEAT, PROGRAM, DELETE and SLEEP functions
do not work.
•
When the DISC play ends, if there's no USB, the unit
will continue to play the disc.
•
When the USB play ends, if there's no DISC, the unit
will continue to play music from the USB.
A-B Repeat Playback
Auto Change Function
10 Skip Function
CD Programming
Press the
+10
or
-10
button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
MX-E630CB-E650CB-ENG-XAA-0710.indd 10
2012-7-10 10:49:14
