Samsung MWR-WH00, Руководство по установке

Страница: 15 / 32

E-
15
ENGLISH
Additional Functions
Monitoring and Setting the Indoor Unit
Option Code
In order to monitor and set the indoor unit option code using
the wired remote controller, hold down the
and
buttons at the same time for 5 seconds.
1
The menu will display .
Press the
button to enter the indoor unit option code
mode.
Note
The first digit represents the page number and
the remaining five digits are option codes.
2
Press the button to change the page. You can change
the page from 0 to 3.
3 Press the
buttons and the button to set the
option code in order.
Note
The option code which is currently setting will
flicker.
4 Press the button to save the changed setting.
You will move to the menu selection display.
Note

Press the button anytime during setup to exit
without setting.

Option code will not be applied if you don’t press the
button.
 
Setting indoor unit option code is only possible in
Master wired remote controller.
You can only check the indoor unit option code in Slave
wired remote controller.
 
Setting indoor unit option code is possible when one
indoor unit is connected. If more than 2 indoor units are
connected, you can only check the Master indoor unit
option code.
Page No.
Option code
MWR-WH00_IM_E_31219-1.indd 15 2009-12-14 ｿﾀﾀ・9:01:38