Samsung MWR-WH00, Руководство по установке

Страница: 14 / 32

E-
14
Additional Functions
Service Mode
 
The wired remote controller supports the following service modes.
Menu
Description
Monitoring and Setting the Indoor Unit Option Code
Monitoring the Indoor Unit Main/Group Address
Monitoring the Indoor Unit Cycle Data
Monitoring and Setting the Indoor Temperature Compensation for the Wired
remote controller
Monitoring the RPM Compensation
Monitoring the EEV Step for the Stopped Indoor Unit during Heating Mode
Monitoring the Filter Time Setting
Monitoring the Temperature Compensation Value under Heating Mode
Checking the Centralized Control Usage
Checking the Drain Pump Usage
Checking the Electric Heater Usage
Checking the Water Coil Usage
Checking the External Control Usage
Checking the Connected Indoor Unit Quantity
Checking the Wired remote controller PCB Settings
Checking the Wired remote controller Software Version
 
In order to access the service mode, hold down the and buttons at the same
time for 3 seconds.
 
Master indoor unit: Indoor unit with the K10 off
Indoor unit with the earliest Main(COM1) address
In case of the Main(COM1) address is repeated, master indoor unit is
selected by random.

All the displayed information in service mode is the information of Master
indoor unit. Only the Master indoor unit’s information will be displayed when
more than 2 indoor units are connected.
 
If the wired remote controller is connected to an indoor unit which does not
support additional functions, only following functions will be available:
- Menu No.4, No.14, No.15 and No.16.
 
will be displayed if the indoor unit does not support the function.
MWR-WH00_IM_E_31219-1.indd 14 2009-12-14 ｿﾀﾀ・9:01:36