28
How to Set the Additional User Functions
1. If you want to set the detailed settings, press the
User Set
button.
You will enter the User Set mode, and the [Main Menu] will be displayed.
2. Refer to the Wired Remote Controller’s User Set list on the next page to select the desired menu.
Using the
[
∧
]/[
∨
]
buttons, select a main menu number and press the
[
＞
]
button to enter the sub-menu setting
screen.
Using the
[
∧
]/[
∨
]
buttons, select a sub-menu number and press the
[
＞
]
button to enter the data setting screen.
Once you have entered the setting screen, the current setting will be displayed.
Refer to the chart for data setting.
Using the
[
∧
]/[
∨
]
buttons, change the settings and press the
[
＞
]
button to move to the next setting.
Press the
Set
button to save the setting and exit to the sub-menu setting screen.
Press the
Esc
button to exit to general mode.
Main menu Sub-menu
1 2 3
5
4
SEG Used
6
• While setting the data, you can use the
[
＞
]/[
＜
]
buttons to set the range of SEG used.
• While configuring the setting, press the
Esc
button to exit to the sub-menu setting screen
without saving the setting.
SETTING ADDITIONAL USER FUNCTIONS
NASA_Wired Remote Control_MWR-WE10N_EN_IB_03732A(1).indd 28
2013-02-01 오후 6:23:31
