14
Humidifying Operation
Blade Selection
This function allows you to use the humidifying operation of MINI AHU indoor unit when the Wired Remote Controller
is connected to MINI AHU indoor unit. Increase the moisture of dry indoor air and adjust the indoor humidity for a more
refreshing indoor environment.
Select only the desired blade to set Air Swing function.
While the air conditioner is on, press the
Humidity
button to begin the humidifying operation.
When the air conditioner is on
1. Press the
Blade
button to select a blade to set the wind direction.
Each time you press the button, it will toggle between
→ →
→ →
.
The number corresponding to the selected blade will blink.
2. Press the
Air Swing
button to select the up/down direction of the selected blade.
will be displayed and the humidifying operation will start.
Press the
Humidity
button one more time.
Cancel
• If the indoor unit is turned off or it does not support
humidifying operation, and you have pressed the
Humidity
button, then the
lamp will be displayed.
• Depending on the individual setting, a different blade could be
selected.
• If the indoor unit is off or the blade selection function is not
supported, and you have pressed the
Blade
button, then the
lamp will be displayed.
NASA_Wired Remote Control_MWR-WE10N_EN_IB_03732A(1).indd 14
2013-02-01 오후 6:23:19
